Installation of flexible hoses of faucet – how to install flexible faucet hoses

In the bathroom, we must use hot water, because we can never use cold water for bathing. In our kitchen, we also need hot water for washing dishes. In order to use conveniently, in modern families, hot water and cold water are usually connected in stainless steel braided hose. In this way, we can use a faucet to control cold and hot water, which is called a cold and hot faucet. The faucets need to be used together with the cold and hot faucet hoses. So, how much do you know about the installation of the hose in the hot and cold faucet? The following small series will introduce the installation method of the hot and cold faucet hose.

Close the main water valve first. Find out the hose connector on the flexible hose and unscrew it. Then remove the tap. The installation of cold and hot water faucet hose is generally fixed on the sink or basin with screws. Find the fixed nut and press it. Then the other end of the damaged hose can be unscrewed. Screw on the small end of the new hose without wrapping the sealing tape. Secure with pliers. Install the stainless steel braided hoses in the reverse order of removal. Put the panel in place. Screw the end of the new hose with a nut onto the water inlet pipe without wrapping the sealing tape. Secure with pliers. That’s OK.


Post time: Oct-13-2022